Products
-
LIPO Battery 11.1V 1000mAh LB-010
HK$350.00
-
TURTLEBOT 3 Burger + Waffle Pi
HK$18,000.00
-
XM430-W350-R
HK$2,300.00
-
SMPS 12V 5A PS-10 [INTL]
HK$300.00
-
Jaguar V4 with Arm
HK$239,800.00
-
ROBOTIS PLAY 300 DINOs
HK$420.00
-
ROBOTIS DREAMⅡ Level 5 Kit [EN]
HK$980.00
-
LIPO Battery Charger LBC-010
HK$150.00
CM-530
CM-530 ** DESCRIPTION – CM-530 is a controller that includes a CPU,TTL communication board, status LED, input button, GP I/O port. – Compatible with the AX and MX series – Supports Bluetooth and Zigbee communication – Connects via PC and USB comm. ** INCLUDES Description Qty Controller CM-530 1 Downloader Mini USB Cable 1...
CM-550
Features CM-550 is a controller that includes a MCU, DYNAMIXEL TTL Comunication board, BLE Slave communication module, Gyro Accelerometer, Temperature sensor, Buzzer, RGB LED, Sensor ports, MIC, etc. BLE slave module is included. With Micro USB Port, it can connect via PC and USB comm. Package Components CM-550 1 Micro USB...
Li-ion Battery 3.7V 1300mAh LB-041
Features Lithium-ion rechargeable battery. PCM is incorporated to protect the battery from overcharge, discharge, and excessive current. Battery cover (blue) included for safety. Package Components Li-ion battery 3.7V 1300mAh LB-041 1 * Battery charger (LBB-041) sold separately H/W Specifications Weight 50g Size 24mm x 70mm x 27mm Voltage 3.7V Capacity...
Li-ion Battery Charger Set LBB-041
Features – This charger is intended for the ROBOTIS Li-ion Battery 3.7V 1300mAh LB-041 rechargeable battery. – Uses 6mm rivets (ROBOTIS DREAM/MINI) to install onto robots. – Can be used as a frame to attach the battery onto robots. – Charging : RED LED, Charging complete : LED OFF –...
LIPO Battery 11.1V 1000mAh LB-010
Features This LiPo battery is intended for robots. PCM is incorporated to protect the battery from overcharge, discharge, and excessive current. Can be recharged with LBC-010 Battery Charger. Package Components LIPO 11.1V Battery LB-010 1 Battery Cover-T 1 FP04-F60 1 Battery Extension Cable 1 * Battery Charger (LBC-010) sold separately...
LIPO Battery 11.1V 1300mAh LB-020
Features This LiPo battery is intended for Engineer Kits. PCM is incorporated to protect the battery from overcharge, discharge, and excessive current. Can be recharged with LBC-010 Battery Charger. Package Components LIPO Battery 11.1V 1300mAh LB-020 1 EF25-F27 1 EF25-F26 1 Battery Extension Cable 1 *Battery Charger sold separately H/W...
LIPO Battery 11.1V 1800mAh LB-012
Features PCM is incorporated to protect the battery from overcharge, discharge, and excessive current. Lithium Polymer rechargeable battery for the ROBOTIS OP series. Cannot be used for PREMIUM/GP because the connector and size differs. Can be recharged with LBC-010 Battery Charger. Package Components LIPO 11.1V 1800mAh LB-012 1 * Battery...
LIPO Battery Charger LBC-010
Features – This charger is intended for the Li-Po battery. – Uses the SMPS for power when charging, thus it must be accompanied with the SMPS 12V 5A. – Support 2S and 3S Cell charge. (Exception, does not charge simultaneously) Package Components LIPO Battery Charger LBC-010 1 * Battery and...
MX-106 Gear/Bearing Set
MX-106 Gear/Bearing Set DESCRIPTION – This gear set is for the Dynamixel MX-106. – Made with metal and specially coated to strengthen endurance and durability of abrasion. – A MX-106 exclusive magnet is attached to the wheel gear. – There are 2 wheel bearings included. – NOT compatible with the EX-106+. ...
MX-64 Gear/Bearing Set
MX-64 Gear/Bearing Set DESCRIPTION: – This gear set is for the Dynamixel MX-64. – Made with metal and specially coated to strengthen endurance and durability of abrasion. – A MX-64 exclusive magnet is attached to the wheel gear. – There are 2 wheel bearings included. – NOT compatible with the RX-64. INCLUDES: ...
Novelte Sterilizing system add-on for Temi
*Temi robot is not included in this package.
OpenCM9.04-C
[902-0084-040] OpenCM9.04-C ■ Description OpenCM9.04 is an open-source controller that runs under 32bit ARM Cortex-M3. All hardware and software are disclosed. Uses an exclusive 3PIN connector to control the ROBOTIS DYNAMIXEL XL-320. Uses USB Cable (Micro-B) to download programs onto the board. Users can choose between using the ROBOTIS RoboPlus...